Author:
Diop A.M.,Bennour A.,Mazer S,El Bekkali M.,Fattah M.,Polleux J-L.,Algani C.
Abstract
This article presents the results of our research on the modeling of an HPT SiGe heterojunction phototransistor. Usually this HPTs type work for a single point of polarization in this work, we were interested in modeling the same HPT on different points of polarization. We will model the HPT to operate at both 2V and 3V, so that we can use the HPT at multiple bias points and reduce costs and allow the reuse of the HPT SiG heterojunction phototransistor on further studies. For a defined point of polarization we will optimize the operation of the HPT so that it flies with the dynamic measurements and we will not base on this HPT by modifying certain values and components so that the HTP works on the other points of polarization.
Reference6 articles.
1. Transmission Quality Measurement of Two Types of 60 GHz Millimeter-Wave Generation and Distribution Systems
2. Internet of Things (IoT) connected devices installed base worldwide from 2015 to 2025, Published by Statista Research Department, Nov 27, 2016.
3. Balde Mamadou D., Vehmas Joni, Nguyen Sinh L. H., Haneda Katsuyuki, Houas Heykel, Uguen Bernard “A 32 GHz Urban Micro Cell Measurement Campaign for 5G Candidate Spectrum Region”, Published in : IEEE 2017 11th European Conference on Antennas and Propagation (EUCAP)
4. Fiaboe Kokou Firmin, Bandyopadhyay Riyanka, Kumar Pranaw “BER Analysis and Mitigation of Four-Wave Mixing effect in Radio over Fiber System” 2019 JETIR April 2019, Volume 6, Issue 4
5. Bennour Alae “Electric modeling Large signal from phototransistor sige in industrial technology for the design of integrated photonical circuit design low cost” Ph.D Thesis, Sidi Mohamed Ben Abdellah University - FES November 2017