Author:
Danilov Alexander,Tusnina Olga
Abstract
Ensuring the required resource of the bearing capacity of the crane beams is one of the most urgent tasks from the point of view of the rational design. The approach proposed in this article is based on the principle of redistribution of the functions of the elements involved in the operation of the crane structure. Weak resistance to rotation of the top flange and the adjoining web zone is a critical disadvantage of a typical crane structure. Additional reinforce elements are proposed to eliminate the consequences of the influence of this disadvantage. At the same time, these reinforce elements practically do not perceive either the vertical or horizontal components of the crane load, preventing only the rotation of the top flange on the length between the beam stiffeners. Another feature is that no additional stress concentration zones are created either in the flange or in the web from welding or drilling holes. The article provides a comparative analysis of the stress-strain state of the crane beams based on the results of numerical calculations carried out with the use of ABAQUS software package. It is shown that the stresses in the upper zone of the beam web, reinforced by the proposed method, are up to 20% lower than in a conventional I-beam. However, despite the simplicity of the solution, the positive results of numerical analysis and the supposed manufacturability of the approach, it is undoubtedly necessary to conduct a series of full-scale experiments on already existing objects.
Reference20 articles.
1. Citarelli S., Feldmann M. Fatigue failure of runway beams due to wheel loads, in Proceedings of the 14th Nordic Steel Construction Conference, 18-20 September 2019, Copenhagen, Denmark (2019)
2. Evaluation of cracks in an offshore crane runway girder
3. Fatigue hazards in welded plate crane runway girders – Locations, causes and calculations
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献