Author:
Anis Muchlison,Asiyatun ,Satriyono Raden Danang Aryo Putro
Abstract
Sentra Industri Mie Soon Desa Manjung is one of the Mie Soon processing and trading businesses located in Desa Manjung, Ngawen, Klaten. The research was conducted on 10 UMKMs under the auspices of the Adi Mulyo Cooperative. Some of these Mie Soon processing businesses still use manual labour and as well as a lack of awareness among workers regarding the implementation of Occupational Safety and Health (K3). Other backgrounds include lack of awareness about Personal Protective Equipment (PPE), lack of lighting in the packaging room, manual removal of sacks of palm flour and firewood, repetitive movement activities for long periods, hands pierced by nails and zinc edges, itchiness due to chlorine, chlorine explodes, odor sting washing waste and so forth. This study aims to assess the previous application of K3 and control potential hazards in reducing work accidents. Based on the conducted assessment of OSH using WISE, it can be concluded that the implementation of OSH in UMKM Mie Soon Desa Manjung is not optimal. The results of the recapitulation and calculation of UMKM J which has the largest percentage of 11%, suggested immediate action. The results of RRN calculations using the SWIFT method identified 7 risks divided into one of the main priority, four of the medium priority, three of the low priority, and one of the lowest priority. Therefore, an improvement of UMKM working activities, especially those in main priority, needs to be seized. These working activities are composed of posture load, operator error, exposure to sharp and hot materials, manual handling, and chemicals.
Reference21 articles.
1. ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PENGOPERASIAN RECIPROCATING COMPRESSOR MENGGUNAKAN METODE SWIFT (STRUCTURED WHAT IF TECHNIQUE) DI PT. ABC
2. Aryanto Yudi, Usulan Program Keselamatan dan Kesehatan Kerja Berdasarkan OHSAS 18001:1999 dan Permenakaer 1996, Bandung: Institut Teknologi Bandung, (2008).
3. Beyond FMEA: The structured what-if technique (SWIFT)
4. Putri C F and Tjahjono N, “Penyuluhan Dan Penerapan Konsep Unsafe Actiondan Unsafe Conditionpada Bengkel Las Gono Di Kelurahan Dinoyo, Kecamatan Lowokwaru, Kota Malang,” 4thConference Innov. Appl. Sci. Technol. (CIASTECH 2021), no. Ciastech. (2021) 889–896.
5. Desrianty A., Prassetiyo H., & Ginanjar G, Rancangan Sistem Keselamatan Kerja Berdasarkan Metode SWIFT (The Structured What-If Analysis) (Studi Kasus di Stasiun Kerja Belt Grinding Unit PRASKA PT.PINDAD Persero Bandung), Prosiding Seminar Nasional Teknoin ISBN No. 978-979-96964. (2012) 3–9.