Abstract
This paper presents a numerical study of heat transfer by convection in a square cavity. The vertical walls of the cavity are differentially heated and the horizontal ones are considered adiabatic. A fan is placed in the middle of the cavity and releases a jet down. Numerical simulation was performed using the lattice Boltzmann method to show the flow patterns and the heat flux depending on the Rayleigh number (thermal convection intensity) and the Reynolds number (fan-driven flow intensity). A parametric study was performed presenting the influence of Reynolds number (20 ≤ Re ≤ 500), Rayleigh number (10 ≤ Ra ≤ 106) and the fan position (0.2 ≤ HF ≤ 0.8). In forced convection mode, the flow structure has been mapped according to the position and the power of the fan. Three structures have emerged: two symmetrical cells, four symmetrical cells and asymmetrical structure. It has been observed that the heat transfer rate increases with the rise of Reynolds number and the reduction of the distance of the fan position from the ceiling. For the latter one, an unfavorable evolution of Nusselt number is observed for Ra > 104.
Subject
Condensed Matter Physics,Instrumentation,Electronic, Optical and Magnetic Materials
Reference22 articles.
1. Thermal comfort and self-reported productivity in an office with ceiling fans in the tropics
2. Indoor environment evaluation of a Dedicated Outdoor Air System with ceiling fans in the tropics – A thermal manikin study
3. Rohles F.H., Konz S.A., Jones B.W., in
Proceedings of the Human Factors Society Annual Meeting
(SAGE Publications, Los Angeles, CA, 1982), p. 118
4. Morton-Gibson M., Coutier P., Place W., in
Proceedings of the 10th National Passive Solar Conference, the Solar Energy & Utilities Conference, the Daylighting Applications Conference, the Building with the Sun Conference
(1985), p. 406
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献