Abstract
There are several different types of the integral data of nuclear fission systems, and the accuracy of the numerical predictions of them are related with each other via the nuclear data commonly used in the numerical simulations. Thus, it is sometimes possible that measurement data of one type of the integral data are used to improve the prediction accuracy of the different type of the integral data. To quantitatively evaluate such possibility, the similarity of the different types of the integral data is important. In this study, we quantitatively evaluate the similarity between neutron multiplication factors and nuclide inventories during nuclear fuel burnup from the viewpoint of the nuclear data uncertainties using the representativity factors. Using the Burner module of the CBZ reactor physics code system for fuel pin-cell burnup problems, we calculated the sensitivity of the neutron infinite multiplication factors and the inventories of the 17 actinoids at several fuel burnup points. The neutron multiplication factor during the fuel burnup was considered the target parameter for which the prediction accuracy is improved, and the degree of similarity of the nuclide inventory data during burnup to the target was quantitatively evaluated using the representative factor. Subsequently, multiple nuclide inventory data were combined using the concept of the extended bias factor method to create a fictitious parameter, and we investigated how much this fictitious parameter can increase the representativity factor for the target parameter. As a result, the representativity factor for the target parameters could be increased to more than 0.8 using some nuclide inventory data, and up to 0.92 depending on the burnup, even taking into consideration the measurement error.