Author:
Bílek Petr,Wicaksana Filicia
Abstract
Submerged membrane bioreactor system is commonly used for water and wastewater treatment processes. This system is a more economical alternative to conventional activated sludge process due to small footprint and better effluent quality. Nevertheless, membrane fouling is a major issue that requires further studies. This paper covers the use of an optical microscope to observe membrane fouling. Bentonite was used as model particles to simulate activated sludge. In-situ observation of particle deposition along the surface of hollow fiber membranes during filtration was performed at various operating conditions. Results from this studies indicated that the flux distribution was affected by the permeate flux and cross flow velocity. Lower CFV and higher flux caused the flux to be more non-uniformly distributed due to more severe fouling. These findings provided useful information to further improve the membrane module design to achieve more evenly distributed permeate flux.