Author:
Matas Richard,Syka Tomáš,Hurda Lukáš,Linhartová Zuzana
Abstract
The article deals with a description of basic results of research of radial compressor stages with 2D e.g. prismatic rotor blades. The experimental facility and the measurement and evaluation process are described briefly in the first part. The second part of this contribution is the numerical simulation and evaluation of the influence of the technological holes in the 2D rotor blades to compressor stage characteristics. The influence of the labyrinth seals clearance on the working characteristics can be found in the last part. The comparison of measured and computed values is presented and discussed.
Reference7 articles.
1. Boyce M. P., Principles of Operation and Performance Estimation of Centrifugal Compressors, Proceedings of the twenty-second turbomachinery symposium, Dallas, USA. (1993)
2. Paroubek J., Cyrus V., Kyncl J., The Influence of Outlet Stator Part Surface Roughness on the Performance of a Very Low Flow Coefficient Centrifugal Compressor Stage, ASME Paper 96-OT-179, (1996)
3. Experimental investigation and numerical modelling of 3D radial compressor stage and influence of the technological holes on the working characteristics
4. Syka T., Matas R., Luňáček O., Numerical and Experimental Modelling of the Radial Compressor Stage, AIP Conference Proceedings, 1745, article number 020059 (2016).
5. Syka T., Geometry structure influence on the radial compressor stage efficiency, Ph.D. thesis, in Czech, University of West Bohemia in Pilsen (2015)