Abstract
This study focuses on different techniques for dispersing Multi-Walled Carbon Nanotubes (MWCNTs) in cementitious materials. The impact of dispersion is observed through electrical resistivity and mechanical properties of cementitious composites. Two contents (0.5 and 1% by mass of cement) of MWCNTs are investigated and three different techniques were used to disperse CNTs in water by sonication: (i) pristine, P-CNT, (ii) functionalized carbon nanotubes by classical approach (dispersive agent, D-CNT), and (iii) by an innovative approach (annealing, A-CNT). Self-sensing response of the material under cyclic compressive loading is measured with Wheatstone Bridge (WSB) circuit. Results showed a detrimental effect of dispersive agent on the resistivity and mechanical properties of cementitious composites irrespective of the content of CNTs. However, the impact of P-CNT and A-CNT on the reduction of mechanical properties is slight. With the use of 1% content of A-CNTs, a stable resistivity response of the material is observed irrespective of the saturation degree. This indicates that content higher than 1% of A-CNTs is not required for the development of smart cementitious composites for structural health monitoring (SHM). The test results of self sensing measurements indicate a poor repeatability of the electrical response for plain mortar under each loading cycle while, stable response is noticed with specimens incorporating 1% of A-CNTs. The maximum variation in fractional change in voltage (FCV) shown by plain mortar is 6.3% indicating high electrical resistance of plain mortar, while in case of mortar containing 1% A-CNTs, variation in FCV is 35% indicating lower electrical resistance and better sensitivity of the material.
Subject
General Materials Science
Reference46 articles.
1. Mehta P.K., Concrete. Structure, properties and materials, 1986
2. Environmental Impacts of Cement Production: A Statistical Analysis
3. Van Breugel K., Is there a market for self-healing cementbased materials, in: Proceedings of the First International Conference on Self-Healing Materials, pp. 1–9, 2007
4. Structural health monitoring of concrete cylinders using protected fibre optic sensors
5. Saito R.,
Dresselhaus G.,
Dresselhaus M.S., Physical properties of carbon nanotubes, Imperial College, London, 1998
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献