Author:
Yudo Hartono,Amiruddin Wilma,Jokosisworo Sarjito
Abstract
Not only the circle hollow pipe but also the rectangular hollow pipes are used on offshore structure. In this study, the bending moment was given at both end of pipe. The strength of buckling moment can be reduced by increasing the length. The rectangular pipe models are varying from a/b = 1, 2, 4; a/t = 10, 15, 20 and L/a = 10, 15, 20. On the rectangular pipe which is have larger rectangle area (a/b), have the larger deformation. Vice versa on the rectangular pipe which is have smaller rectangle area (a/b), as though on a/b = 2 and a/b = 4 which is have smaller deformation. The conclude that is the larger one of rectangle area then the oval deformation is large too. The buckling strength will increase with decreasing a/b and deformation at mid span will be increase. The buckling strength decrease with increasing of L/a and a/t. The strength of the buckling moment in the elastic state will decrease with increasing of a/t and a/b. For a/b = 1, the strength of buckling moment will tend to be equal at L/a = 10-20. Pipe with increasing of a/t, L/a and a/b will be elastic.
Reference5 articles.
1. Timoshenko S.,
Gere J..,
Theory of elastic stability, 2nd edn. McGraw-Hill International Book Company,
New York
(1961).
2. Yudo H.,
Yoshikawa T.., Mechanical behaviour of pipe under pure bending load. In: Proceedings of the 26th Asian technical exchange and advisory meeting on marine structures, pp 359–364
(2012).
3. Hauch S.,
Bai Y.., Bending moment capacity of pipe. Offshore Mech Arct Eng PL-99-5033
(1999).
4. Buckling phenomenon for straight and curved pipe under pure bending
5. Buckling phenomenon for imperfect pipe under pure bending
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献