Author:
Kubas Šimon,Kapjor Andrej,Vantúch Martin,Pafčuga Marián
Abstract
When choosing silencers in air conditioning, it is necessary to pay attention not only to the acoustic attenuation, but also to the pressure loss of the silencer. If the pressure loss of the damper is too high, noise will occur directly in the damper. The pressure losses of the silencers are determined mainly experimentally. Based on the performed measurement, a CFD model of the selected silencer was constructed, where the influence of various parameters on the value of the pressure loss of the selected silencer was investigated.
Reference6 articles.
1. Szekyova M., Ferstl K., Novy R., Vetranie a klimatizácia. 62-68 (2004)
2. Idelchik I. E., Handbook of hydraulic resistance. 356-359 (2008)
3. Gebauer G., Rubinová O., Horká H., Vzduchotechnika.132-135 (2007)
4. Patsch M., Pilát P., 21st International Scientific Conference on The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy, Simulation of Combustion Air Flow in the Gasification Biomass Boiler 168 (2018)
5. Lenhard R., Malcho M., Jandačka J., Heat transfer engineering 40, (2019)