Author:
Náprstková Nataša,Kraus Pavel,Sviantek Jan,Nguyen Van Tuong
Abstract
Treatment of metal alloys is one of the ways to affect the quality and properties of the material At the Faculty of Mechanical Engineering of the Jan Evangelista Purkyně University in Ústí nad Labem, one part of the research consists of searching for the influence of various modifying and inoculating elements on selected aluminium alloys. One of the alloys undergoing the present research is the hardening aluminium alloy AlSi9CuMnNi. The article describes one from these experiments, than AlSi9CuMnNi alloy was modified with various amounts of calcium (0.05, 0.1 and 0.15 wt. % Ca) and 0.2 wt. % Sb. The alloy without modification and with 0.2 wt. % Sb was heat-treated, too. In the experiment were made three castings for each type of alloy. Experimental samples were evaluated form view of final hardness, were machined, too and there were analysed tool wear of using cutting inserts and final ship from machining (turning). Presented experiments are part of the extensive research undertaken at FME at JEPU in Ústí nad Labem.
Reference16 articles.
1. Michna S., Lukac I., Louda P., Ocenasek V., Schneider H., Drapala J., Koreny R., Miškufova A., et al. Aluminium Materials and Technologies from A to Z. Adin, Prešov (2007)
2. Michalski M., Romankiewicz F.. AlSi21CuNi silumin modification with phosphor and strontium micro additions E3S. Web of Conferences, 19, Article number 03026 (2017)
3. Formanek J., Kucerova L., Tochylin M.. The Hazards of Defects and Poor Quality of Aluminium Materials. Proceedings of 24th Internatioal Conference on Metallurgy and Materials Metal, 1552-1557 (2015)
4. Effect of modification on the solidification of Al–Si aluminum alloys
5. Modification of AlSi9CuMnNi Alloy by Antimony and Heat Treatment and Their Influence on Tool Wear after Turning
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献