Abstract
This study investigates the effect of process parameters such as diameter of drill, cutting velocity, feed rate and coolant supply on material removal rate while drilling of Al-SiC composite. Sample specimens are prepared by stir-casting method and experiments are designed using Taguchi’s L9 orthogonal array. Response data is analysed using S/N ratio and significant process parameters are identified using Analysis of Variance (ANOVA). Study shows that drill diameter, followed by feed rate are found to be the most significant factors which influence MRR.
Reference9 articles.
1. Ozben Tamer, Kilickap Erol and Cakir Orhan, Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC, Materials processing technology 198 (2008)
2. Jadhav Shrinivas, Sankpal Jaywant, Chaudhari Mukesh and Patil Nilesh, A review on drilling of metal matrix composites, International Journal of Current Engineering and Technology, pp. 1-7 (2016)
3. Ravindranath V M, Shiva Shankar G S, Basavarajappa S, Suresh R, Effect of cutting parameters on thrust force and surface roughness in drilling of Al-2219/B4C/Gr metal matrix composites, IOP Conf. Series: Materials Science and Engineering149 (2016)
4. Priyank D., Arun K., Venkata Ramaiah P., Optimization of process parameters in drilling of hybrid aluminium metal matrix composite”, International Journal of Innovative Research in Science, Engineering and Technology, 5 (2016)
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献