Author:
Mohan Padhy Sudhansu,Sinha Rudrajit,Mishra Ruby,Chandra Mishra Purna
Abstract
A structural analysis has been performed on the setup of a spray cooling system for a model of a hot strip mill. The objective was to design a run out table (ROT) whose length is reduced for a spray cooling system. The setup consists of a bed (ROT) whose height can be adjusted as desired, and a carriage which would be carrying the hot plate, moving along the bed, for experimentation. The CAD modelling was done in CATIA and the analysis was performed in ANSYS Workbench. A prototype of the whole setup was built from the virtual model and was controlled using products from National Instrument Corporation (NI). The analysis is being conducted for the design optimization of the entire setup and its safety.
Reference12 articles.
1. Liu Z., Experiments and Mathematical Modelling of Controlled Runout table Cooling in a Hot Rolling Mill, The University of British Columbia, Department of Metals and Materials Engineering, (2001)
2. The Study of Cooling Process on Runout Table by Simulation Method
3. Hernandez-A Vila V. H., Heat Transfer Model of the Hot Tolling Runout Table-Cooling and Coil Cooling of Steel, The University of British Columbia, Department of Metals and Materials Engineering, (1994)
4. Cooling process on a run-out table by the simulation method
5. Guo R.-M., Modeling and Simulation of Run-Out Table Cooling Control Using Feed forward-Feedback and Element Tracking System, IEEE Transactions On Industry Applications, 33, (March/April 1997)
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献