Author:
Musiał Janusz,Horiashchenko Kostyantin,Horiashchenko Serhiy,Szyca Mikołaj
Abstract
The article is devoted to the study of the state of diagnosing the integrity of cables. The current state of diagnostics of problems of damage of cables is shown. Formulas for calculating several signals reflected from damage have been removed. To ensure the automation of the measurement process, based on the functional diagram of the automatic diagnostic device with measurement of distances to damage by the combined pulse-phase method, a block diagram of an automated distance meter to damage was developed, which allows measuring the investigated cable in automatic mode. This reduces the loss of time to perform measurement operations and ensure the required sequence of actions without the participation of the operator.
Reference35 articles.
1. Jensen C.F. (2014) Series Phase and Sequence Impedance Matrices of Crossbonded Cable Systems. In: Online Location of Faults on AC Cables in Underground Transmission Systems. Springer Theses (Recognizing Outstanding Ph.D. Research). Springer, Cham. https://doi.org/10.1007/978-3-319-05398-1_4
2. Fibre Ch.: Connection to the future. Technical overview. The Fibre Channel Association. – Published by LLH Technology Publishing, 66 (1998).
3. Glebowić G., Andrianov A., Vvedensky Y. et al. Research of objects by means of picosecond impulses. Radio and communication, 256 (1984).
4. Colloca V., Fara A., Nigris M., Rizzi G., Comparison among different diagnostic systems for medium voltage cable lines, paper 15-109, CIRED 2001 Paris, 5 (2001).
5. Hoff G., Kranz H., Correlation Between Return Voltage and Relaxation Current Measurements on XLPE Medium Voltage Cables, ISH, London, UK, paper 5.102. 14 (1999).