Abstract
The favorable choice of material for structural elements for a specific purpose of use depends on the properties of the material that define its behavior in given conditions. Considering the possibility of the appearance of different types of mechanical failures during work under defined conditions, this paper deals with research on the behavior of materials subjected to uniaxial mechanical fully reversed fatigue tests at room temperature in an air atmosphere. The research refers to structural steel (S235JRC+C /1.0122), alloyed carbon steel (18CrNi8/1.5920) and chromium martensitic stainless steel (X46Cr13/1.4034). The tests were performed in an air atmosphere at room temperature, and the test results are presented in the form of a stress-life (S-N) diagrams. The fatigue (endurance) limit (/MPa) obtained for each of the tested materials subjected to a mechanical fully reversed fatigue test, (R = - 1), at room temperature, is as follows (material / fatigue limit): 1.0122/202; 1.5920/285; 1.4034/325. In addition, at room temperature, the parameters such as ultimate tensile strength and yield strength, as well as the level of Charpy impact energy, were determined.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference17 articles.
1. N.M. Dowling: Mechanical Behavior of Materials (Pearson, USA 2013).
2. K.J. Bathe: Finite Element Procedures in Engineering Analysis (Prentice-Hall, Inc., USA 1982).
3. R.I. Stephens, A. Fatemi, R.R. Stephens and H.O. Fuchs: Metal Fatigue in Engineering (John Wiley & Sons, USA 2001).
4. J.A. Collins: Failure of Materials in Mechanical Design (John Wiley & Sons, USA 1993).
5. J. Brnic, G. Turkalj, J. Niu. M. Canadija and D. Lanc: Mater Design 47., 497-504 (2013).