Affiliation:
1. Helmholtz-Zentrum Hereon
Abstract
Multi-layer friction surfacing (MLFS) follows the principle of the friction surfacing (FS) process, which is an established solid state coating technology for similar and dissimilar metallic materials. With this approach, the deposition of a consumable material on a substrate is enabled via friction and severe plastic deformation (SPD), processing the material below its melting temperature. The focus of the present study lies on the investigation of the temperature distribution during MLFS deposition. The measurements show that the temperature within the stack tends to be slightly higher on the advancing side. Additionally, the deposition behavior, i.e. deposition rate and consumable stud consumption rate, was investigated. Along MLFS stack height, deposition efficiency tends to sightly decrease, shown by decreasing layer thickness and increased length of remaining consumable studs. Overall, MLFS is highly repeatable for multiple layers and presents stable deposition conditions. Additionally, the technique has a comparatively low heat input to the substrate and the already deposited material.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference1 articles.
1. H. Klopstock and A. R. Neelands. An improved method of joining or welding metals, british patent specification 572789, (1941).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献