Affiliation:
1. Aditya Engineering College
Abstract
For the purpose of this investigation, carbon and Kevlar fiber-reinforced plastics were subjected to dynamic testing. Carbon-Kevlar fibers are included into the LY 556 resin and AR 951 hardener. Fiber makes for 40% of the study's total weight. The carbon and Kevlar composites were created by hand lay-up. The orientation considered in this research is 0/0 and 0/90 for both carbon and Kevlar composites. Advanced characterizations such as TMA and DMA has been integrated in this research. By using DMA (Dynamic Mechanical Analyzer) and the thermomechanical Analyzer (TMA), the dynamic properties were acquired. ASTM E756 was used to conduct the tests. Composite heating at room temperature to 1200 C was the temperature variable under investigation. The studies were conducted on TMA and DMA with a force of 0.002N, respectively. DMA uses a three-point bending loading design for its samples. Temperature affects the dimensions, storage modulus, loss modulus, and tan delta.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference19 articles.
1. B. Roester, B. Sarh, M. Kismarton, Composite Structures: the primary a hundred Year, 16th International Conference on Composite Materials, Japan Society for Composite Materials, Kyoto, Japan, (2007) 1-41.
2. K.C. Manikandan, S. T. Nair, Thermal and Dynamic Mechanical Analysis of cinnamene Composite strengthened with Short Sisal Fibres, Composites Science and Technology, (2001)2519-2529.
3. S. Houshyar, R. A. Shanks, Mechanical and Thermal Properties of Toughened polypropene Composites. Journal of Applied compound Science, 105(2007) 390-397.
4. A. Betiana, M. M. Acha, Creep and Dynamic Mechanical Behaviour of PP-Jute Composites: result of the surface Adhesion. Composites half A: field of study and producing, (2007) 38.
5. K. G. N. C. Alwis, C. J. Burgoyne, Time-Temperature Superposition to see the Stress-Rupture of Aramid Fibres, Applied Composite Materials, 13 (2006)249–264.