Affiliation:
1. Sreenidhi Institute of Science and Technology
Abstract
In high strength aluminium alloy material turning operation, high material removal and good surface are desirable output characteristics. In this investigation, experiments were conducted according to design of experiments concept with a combination of turning input parameters such as cutting speed, feed rate and depth of cut and also studied the effect of process parameters on multi outputs for machining of Al2024 aluminium alloy. Grey relation analysis was applied to know the robust process parameters. The contribution each parameter was realized with analysis of variance statistical method. The cutting speed is the most influencing parameter with contribution of 62.3% followed by depth of cut with 26.4%, and feed rate with 9.9%.
Publisher
Trans Tech Publications, Ltd.
Reference25 articles.
1. Optimization of cutting conditions during continuous finished profile machining using non-traditional techniques;Saravanan;The International Journal of Advanced Manufacturing Technology,2005
2. M.P. Groover, Fundamentals of modern manufacturing- materials processing and systems, First Ed, Prentice-Hall , Englewood, Cliffs, 1966.
3. Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis;Senthilkumar;Measurement
4. R. Jeyapaul, P. Shahabudeen, K. Krishnaiah, Quality management research by considering multi-response problems in the Taguchi method - a review, Intl. J. Adv. Manufact. Technol. 26 (2005) 1331–1337.
5. Optimizing Single Point Diamond Turning for Mono-Crystalline Germanium Using Grey Relational Analysis;Goel;Materials and Manufacturing Processes,2014