Affiliation:
1. Azerbaijan Technical University
2. Brandenburg University of Technology
3. Hochschule Zittau
Abstract
The article discusses the study of the deformation of shafts with a diameter of ø30mm and a length of 400 mm during processing on CNC lathes. Experiments have revealed that during rough turning of the shafts, the magnitude of shaft deformation is 2.2-2.5 times greater compared to finish turning. It has been determined that during processing shafts on a CNC lathe, the maximum deformation is observed near the tailstock side of the machine.
Publisher
Trans Tech Publications Ltd
Reference13 articles.
1. Developing Criterion and Optimization of PAL System;Amirov;Applied Mechanics and Materials,2013
2. Amirov, F.G. (2017). The classification of components for adjustable or settable automatic production lines using CNC machine tools. Energieeffizienz im Bauund Maschinenwesen, Liberec, Tscheshische Pepublik, pp.7-11.
3. Improving the accuracy of manufacturing long shafts and axes of precast rotors;Popov;E3S Web of Conferences,2019
4. Amirov, F.G. (2020). Some Aspects of Increasing the Efficiency of Automated Production Lines. Izvestiya vysshih uchebnyh zavedeniy. Mashinostroenie. Bauman Moscow State Technical University.(Moscow), № 9, pp.18-23.
5. Amirov, F.G. (2020). Combination of tool blocks in the position of mechanical processing of alloys with directed crystallization of eutectic structures on multi-threaded automatic lines. Vestnik Mashinostroeniya, №10, Moscow. pp.79-81, Publisher "Innovatsionnoye mashinostroeniye".