Structures of Wooden Beams of Increased Load-Bearing Capacity

Abstract

The article suggests the use of glued reinforced wooden beams with increased load-bearing capacity. The beam is provided with reinforcing elements in the grooves, namely, in the lower zone – prestressed flexible bundles made of composite, and in the upper zone – steel rods. The analysis of structural behaviour of the beam and the location of the reinforcing elements, the calculation of the bearing capacity of beams and evaluation of the effectiveness decision on material and Flexural rigidity. Composite rods can be prestressed to increase the efficiency of the reinforcement and increase the beam stiffness and load-bearing capacity. Installation of reinforcing elements along the line of action of the main tensile stresses in a wooden beam creates tension in them, which allows the use of flexible bundles and leads to a decrease in the complexity of their installation in the lower grooves, and, therefore, reduces the complexity of manufacturing a wooden beam as a whole.