Affiliation:
1. Pathumwan Institute of Technology
2. King Mongkut's University of Technology North Bangkok
Abstract
This paper is to study weldability and joining characteristics of dissimilar metal welding between low carbon steel and ferritic stainless steel using ER308L and ER309L filler wires. Weldability and welded joints were evaluated by microstructure analysis and bend test. It was observed that the microstructure of the fusion zone and the bend test of the welded joint were significantly affected by welding parameters and filler wire. A welded joint prepared with high heat input using the ER309L filler wire exhibited a significant delta ferrite and austenite microstructure. In contrast, when employing the ER308L filler wire with a high intensity welding current, martensite, and carbide formed at the fusion zone. The bend property was acceptable for all the specimens, and there was no evidence of solidification cracking.
Publisher
Trans Tech Publications, Ltd.
Reference8 articles.
1. A. Series, S. Designer, Handbook. Welding of stainless steels and other joining methods. American Iron and Steel Institute, Washington (1988).
2. Characterization of AISI 304/AISI 409 stainless steel joints using different filler materials;Shojaati;Construction and Building Materials
3. Effects of welding wire and torch weaving on GMAW of S355MC and AISI 304L dissimilar welds;Tasalloti;The International Journal of Advanced Manufacturing Technology,2013
4. Study on microstructure and mechanical characteristics of low-carbon steel and ferritic stainless steel joints;Sarkari Khorrami;Materials Science and Engineering: A
5. N. L. Vithi, M. G. Maruma, A. Maleka, D. Chetty, Study on microstructural and mechanical Properties of joining 3CR12 stainless steel and S355 carbon steel by GMAW using 308L filler wire, Composite Materials. 6(1) (2022) 1-6