Affiliation:
1. Politehnica University of Timisoara
2. Aspad Com
3. ISIM Timisoara
Abstract
Machining of difficult-to-process materials, including composite materials, is carried out in cost-effective conditions by resorting to abrasive water jet cutting. The quality of the kerf depends on a large number of input parameters, so that their selection becomes a current problem of real technological interest. Thus, the paper analyzes the cut zones defined by the material removal mechanisms, regarding both their extension and the obtained roughness, through the experimental modeling of the Rz parameter.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference20 articles.
1. Information on https://www.dupont.com › public › documents: Kevlar® Aramid Fiber Technical Guide – DuPont. Accessed on 01.11.(2022)
2. Information on https://www.clm-pro.com/ballistic-kevlar-aramid-195-g-m%C2%B2-plain-detail?tmpl=component&format=pdf. Accessed on 01.11.(2022)
3. Information on https://www.perrinaquadecoupe.fr/materiauxcarbonekevelar.html. Accessed on 01.11.(2022)
4. Information on https://www.jeccomposites.com/news/composite-repair-and-machining-using-abrasive-waterjet. Accessed on 01.11.(2022)
5. A correlation for predicting the kerf profile from abrasive water jet cutting;Ma;Experimental Thermal and Fluid Science