Abstract
In this research, a main matrix has been derived from the stress components in the inclined plane with an angle θ that calculates the normal stresses and shear stress in the inclined plane to be used in calculating the main stresses and the maximum shear stress in one step, this is done using the principal stress angle which is calculated from known stress compounds. As well as calculating the maximum shear stress after using the correction factor. The inverse of this derived matrix can be used to calculate the stress compounds through the known principal stresses and this applies to the components of the principal strain and strain, and the maximum shear strain. All this is done through MATLAB simulation Keywords: Normal Stresses and Strains, Shear, Principal Stresses, max. Shear Stress
Publisher
Trans Tech Publications Ltd
Reference21 articles.
1. Novel Mechanical Strain Characterization of Ventilated ex vivo Porcine and Murine Lung using Digital Image Correlation;Mariano;Frontiers in Physiology,2020
2. David Roylance," Transformation of Stresses and Strains", Cambridge, MA 02139 May 14, 2001.
3. Low-cycle full-field residual strains in cortical bone and their influence on tissue fracture evaluated via in situ stepwise and continuous X-ray computed tomography;Peña Fernández;Journal of Biomechanics
4. Robert M. Jones, "mechanics of composite materials ", second edition, Taylor & Francis, (1999)
5. Full-Field Strain Uncertainties and Residuals at the Cartilage-Bone Interface in Unstained Tissues Using Propagation-Based Phase-Contrast XCT and Digital Volume Correlation;Tozzi;Materials,2020