Affiliation:
1. University Politehnica Timisoara
2. ISIM Timisoara
Abstract
Ni-based metallic amorphous alloys in ribbons shape are used in the manufacture of electrical resistances due to their high electrical resistivity, a value that does not change with temperature. The production of such resistances involves joining processes of amorphous ribbons. The amorphous alloys are difficult to weld by conventional melting processes, even in the presence of inert gas. Consequently, this paper presents the research carried out regarding the capacitor energy storage welding technique of Ni63Cr12Fe4Si8B13 amorphous ribbons. The structural analysis was done by microscopy, X-ray diffraction, and differential scanning calorimetry, and the mechanical behavior was determined by nanoindentation. The joints obtained showed that the proposed welding technology is appropriate for this type of joint.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference6 articles.
1. Weldability of Zr50Cu30Al10Ni10 bulk glassy alloy by small-scale resistance spot welding;Fujiwara;Materials Science and Engineering: A
2. Laser welding of Zr45Cu48Al7 bulk glassy alloy;Li;Journal of Alloys and Compounds
3. Metallic glass coating on metals plate by adjusted explosive welding technique;Liu;Applied Surface Science
4. Burcă Mircea, Codrean Cosmin: Research on welding with stored energy in the capacitor of the amorphous alloys in ribbon form. In: Nonconventional Technologies Review, Vol. XVII (1), Iss. 1, (Apr 2013): 29-33
5. Processing and characterization of Ni63Cr12Fe4Si8B13 amorphous alloy for the manufacturing of electrical resistances;Drăgănescu;Materials Today: Proceedings