Affiliation:
1. Samara National Research University Named after Academician s.p. Korolev
Abstract
The article describes the touch probing system with the strain gage as the main measuring element. The device has small geometric dimensions and it was developed to measure the gas turbine engine compressor blades. To select the optimum configuration of the probing system, mathematical models of two principal configurations were developed. Simulation modeling of the force of the measured surface impact on the measuring tip was carried out in the Ansys environment for these assemblies. On the basis of practical experiments, the diagram of the deviation of the probe on the resistance of the strain gage was constructed. Reference element were measured to determine the accuracy of the designed touch probing system.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference14 articles.
1. Krymov V.V., Eliseev U.S., Zudin K.I. Production of gas turbine engine blades. M .: Mashinostroyeniye / Mashinostroyeniye -Polet (2002) 376.
2. Kazanskiy, N.L., Murzin, S.P., Tregub, V.I., Optical system for realization selective laser sublimation of metal alloys components, Computer Optics - 2010, - V. 34, -№4, - pp.481-486.
3. Hansen HN, Carneiro K, Haitjema H, De Chiffre L. Dimensional Micro and Nano Metrology. CIRP Ann Manuf Technol. 2006, 55(2): pp.721-43.
4. Haitjema H, Pril W and Schellenkens P H J, A silicon-etched probe for 3 D coordinate measurements with an uncertainty below 0.1 μm, IEEE Trans. Instrum. Meas. 50 1519–23 (2001).
5. Takaya Y, Takahashi S, Miyoshi T and Saito K, Development of the nano-CMM probe based on laser trapping technology, Ann. CIRP 48 421–4 (1999).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献