Affiliation:
1. Universitas Brawijya
2. Brawijaya University
3. Malang State University
Abstract
The aim of this research is to investigate the hardness of implant material Stainless Steel (SS) 316L due to ball peening at low temperature. In this paper, SS316L ball peening was conducted in various cryogenic temperature. The steel ball peening mechanism was bombarded on metal surface using peening ball. The shot peening treatment was performed for 10 minutes using steel balls with the size of 5 mm and 6 Bar compressed air flow. The treatment temperatures were carried out at-35°C, -45°C, and-55°C respectively. The results show that the hardness of SS316L after steel ball peening processes increasing as decreasing temperature treatment.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference22 articles.
1. C. P. Bergmann, A. Stumpf, Dental Ceramics, Springer-Verlag, Heidelberg, Berlin, (2013).
2. R. Honeycombe, Bhadeshia, H.K.D.H. Steels, Microstructure and properties, 2nd Ed.; Gray Publishing, Tunbridge Wells, Kent, (1995).
3. A.J. Sedriks, Corrosion of Stainless Steels, 2nd Ed., Wiley, New York, (1996).
4. Dettner, P. Electrolytic and Chemical Polishing of Metals, Ordentlich Publishers, Tel Aviv, (1988).
5. C. Aparicio, F. Javier Gil, C, Fonseca, M. Barbosa, J.A. Planell, Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications, Biomater. 24 (2003) 263-273.
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献