Affiliation:
1. Indian Institute of Technology, Bombay
2. Russian Academy of Sciences
Abstract
Rheological study has been performed experimentally by using melt flow index (MFI) tester on a mixture of CI (Carbonyl Iron) powder and HDPE (High-Density Polyethylene) polymer. The rheological properties such as volume flow rate (cm3/s), shear strain rate (s-1) and viscosity (Pa.s) are investigated for varying conditions of temperature and weight (pressure). This also includes experimental determination of viscosity dependence over parameters like temperature, shear strain rate and CI powder loading by weight added in HDPE. For this experimental conditions selected are temperatures 4480K-5230K in steps of 250K, weights in MFI tester (ultimately converted to shear strain rate) 0.325, 1.20, 2.16, 3.80, 5.00Kg and carbonyl iron powder loading in binder HDPE (by weight) 80%-92% in steps of 6%. A constitutive equation for viscosity is formulated which considers all factors affecting viscosity with the maximum percentage error of about 4% between experimental value and value predicted by the formulated equation is obtained.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference6 articles.
1. ASTM D1238-13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer, West Conshohocken, PA, 2013, https://doi.org/10.1520/D1238.
2. C. D. Avila, Getúlio F. Manoel and Ricardo Geraldo Sousa, Rheological and Thermal Behavior of High-Density Polyethylene ( HDPE ) at Different Temperatures,, Mater. Sci. Appl., vol. 5, no. November, p.923–931, (2014).
3. M. S. Huang and H. C. Hsu, Effect of backbone polymer on properties of 316L stainless steel MIM compact,, J. Mater. Process. Technol., vol. 209, no. 15–16, p.5527–5535, (2009).
4. K. K. Rane and P. P. Date, Rheological Investigation of MIM Feedstocks for Reducing Frictional Effects during Injection Moulding,, Adv. Mater. Res., vol. 966–967, p.196–205, (2014).
5. S. Y. M. Amin, K. R. Jamaludin, and N. Muhamad, Rheological Properties of Ss316L Mim Feedstock Prepared With Different Particle Sizes and Powder Loadings,, Inst. Eng. Malaysia, vol. 71, no. 2, p.59–63, (2009).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献