Affiliation:
1. AGH University of Science and Technology
Abstract
In this work, hot extrusion of light metal scraps as a new way of plastic consolidation will be presented. This kind of material recovering is a promising alternative for conventional recycling processes. Nowadays discards from machining of semi-finished products are being recycled throughout re-melting processes. However, due to its significant susceptibility to oxidation most of the chips and scraps are burnt during the melting process. It has been already recognized that aluminum losses connected with this operation can reach from 40% to 50%. A technology that has been presented in this work combines cold compaction and hot extrusion of 413.0 aluminum alloy scraps. It was found that quality of as-extruded rods depends strongly on extrusion conditions. Higher extrusion speed leads to higher quality of rods surface. Additionally brittle Si and Al-Fe-Si particles increases overall mechanical properties in comparison to its industrial counterpart.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference12 articles.
1. Information on http: /www. crugroup. com.
2. M. Schlesinger, Aluminum Recycling, first ed., CRC Press, (2006).
3. A. Kaye, A. Street, Die Casting Metallurgy: Butterworths Monographs in Materials, Butterworth-Heinemann, (1982).
4. H. Dybiec, P. Kozak, Evolution of grain structure during hot extrusion of powders, Powder Metallurgy Progress. 3 (2003) 146-151.
5. H. Dybiec, P. Kozak, Hot extrusion of aluminium powders, Int. J for Ind. Res. & Appl. Aluminium. 80 (2004) 39-43.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献