Damage of PVD-Coated Cutting Tools Due to Interrupted Cutting of Ni-Based Superalloys

Abstract

Ni-based superalloys are typically difficult-to-cut materials. During machining, the cutting forces and temperatures of these superalloys are generally higher than those of other materials. Therefore, the tool life of the coated carbide cutting tools used for superalloy machining is shortened. This study evaluates the damage of the coated end mills during interrupted cutting of alloy 718 and finds the coating properties necessary for improved cutting of Ni-based superalloys. Damage of the PVD-TiN-coated cutting tools was observed by scanning electron microscopy and transmission electron microscopy of the surfaces and cross sections. In addition, friction forces were measured during turning for some coatings, and hardness of the coatings was measured after annealing. Plastic deformation of the coating and crack formation was shown to occur at the coating cross section. In addition, we determined that the major factor for the damage was high friction force between the coating surface and work material at high temperatures. In summary, coatings with stability at high temperatures and low friction forces during machining can reduce the damage of coated cutting tools, thus increasing the tool life.