Affiliation:
1. North University of China
Abstract
This article presents a design and fabrication method of a embedded cavity using alumina casting-belt. This method is based on HTCC (high-temperature co-fired ceramic) MEMS technology with using fugitive materials. The test structures are fabricated using two different fugitive materialsPolyimide film and ESL4900 film and two different lamination pressures (15MPa and 21MPa). The final stack was sintered by selecting different temperature process parameters in the high-temperature sintering process. Complete the analysis of the sample cavity structure using a SEM (scanning electron microscope). The manufacturing method is available for structural integrity and good air tightness of ceramics sealed cavity and it will be applied to the fabrication of flow sensors, capacitance pressure sensors etc.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science