Affiliation:
1. University of Science and Technology Beijing
Abstract
Retained austenite of Q&P (Quenching and Partitioning) processed 0.2C-1.51Si-1.84Mn steel heated in intercritical region and full austenite region are investigated. The results show that the maximum volume fraction of retained austenite heated in intercritical and full austenite region is 13.39% and 5.23% respectively. Carbon partitioning completed within 10 s for both heating modes. The microstructure after full austenitization consisted of martensite laths and thin, inter-lath retained austenite film. Austenite blocks is observed as well after partial austenitization.The distribution of retained austenite is related to the amount of grain boundaries by EBSD techniques.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. S Takehide: ISIJ International. Vol. 41 (2001), P. 520.
2. Bingqiu Ao: Automobile Technology & Material. Vol. 8 (2002), P. 1 (In Chinese).
3. Speer J G, Matlock D K, De Cooman B C, Schroth J G: Acta Materialia. Vol. 51 (2003), P. 2611.
4. Zhou Y: Material Analysis Beijing (Mechanical Industry Press, Beijing 2006) (In Chinese).
5. Sugimoto K, Sakaguchi J, Iida T, Kashima T: ISIJ International. Vol. 40 (2000), P. 921.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献