Affiliation:
1. United Institute of Mechanical Engineering of the National Academy of Sciences of Belaru
2. Institute of Applied Physics
Abstract
It was shown that under dry contact conditions, under normal load of to 2 MPa, all coatings demonstrated a significant increase in wear resistance compared to that of the substrate. However, among them, the Mo coating showed the highest wear resistance: ~20 times higher than that of the uncoated steel. That was caused not only by the Mo high microhardness and the lowest initial roughness, but also by the structure of this coating. Meanwhile, the Ti + SiC samples displayed the highest microhardness among investigated coatings. A correlation was established between the microhardness of the coating and the friction coefficient: the larger the microhardness of the coating, the higher is the coefficient of friction. An X-ray analysis of the coatings obtained by ESA on steel with compositions (Ti + Al + C), (Ti + AlN) and (Ti + SiC) revealed phases of titanium carbide, titanium nitride, intermetallic compound AlFe3, and small amounts of aluminum nitride, silicon dioxide and titanium dioxide. This could explain the high microhardness (from 6.8 up to 13.8 GPa) of the obtained coatings.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference5 articles.
1. A.E. Gitlevich, V.V. Mikhailov, N.Ya. Parkanskii, B.M. Revutsky, Elektroiskrovoe legirovanie metallicheskikh poverkhnostei, Shtiintsa, Kishinev, 1985. (in Russian).
2. V. I. Agafii, V. A. Yurchenko, V. I. Yurchenko, V. M. Fomichev, V. I. Petrenko, A. I. Dikusar, Wear resistance of coatings manufactured by electric spark plating with Al-Sn electrodes, Surface Engineering and Applied Electrochemistry. 2011, 47(6), 12-16.
3. V. I. Agafii, V. I. Petrenko, V. M. Fomichev, V. I. Yurchenko, E. V. Yurchenko, A. I. Dicusar, Electrospark alloying for deposition on aluminum surface of Al-Sn coatings and their wear resistance under dry friction, Surface Engineering and Applied Electrochemistry. 2013, 49(3), 1-8.
4. J. Padgurskas, V. Agafii, V. Mikhailov, R. Rukuiza, and R. Kreivaitis, Tribological Properties of Combined Molybdenum Coatings Formed by Electric-Spark Alloying on Stainless Steel, ISSN 1068-3666, Journal of Friction and Wear. 2016, Vol. 37, No. 5, 448–453.
5. J. Padgurscas, R. Kreivaitis, R. Rukuiza, V. Mihailov, V. Agafii, R. Kriukiene, A. Baltusnikas, Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surface and Coatings Technology. 2017, Vol. 311, 90-97 (15 February).
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献