Research on Squeeze Casting Composite Mold Materials by Plasma Spraying

Abstract

Composite mold samples used in squeeze casting was fabricated by plasma spraying with 5CrMnMo and 3YSZ, which was shown high bonding strength and good thermal shock resistance. The best parameters with transition coat were explored by mechanical analyses. As results, the transition layer structure made of 75 percent NiCoCrAlY powders showed bonding strength was higher to 34.35MPa and that thermal cycles were up to 46.8 times. The effect of the transition layer was analyzed by microstructures and the failure mechanism of the coating material with a transition layer was discussed. The conclusion was that the physical mismatch and thermodynamic mismatch between the matrix and ceramic layers were the main cause of the failure.