Calculation of Surface Hardness when Surface Grinding ASIS 1045 Steel-Reference-Cited by-同舟云学术

Calculation of Surface Hardness when Surface Grinding ASIS 1045 Steel

Published:2020-07 Issue: Volume:853 Page:3-7
ISSN:1662-9795
Container-title:Key Engineering Materials
language:
Short-container-title:KEM

Author:

Trung Do Duc¹,Tung Nguyen Nhu¹,Son Nguyen Hong¹,Ky Le Hong²,Hong Tran Thi³,Cuong Nguyen Van⁴,Pi Vu Ngoc⁵

Affiliation:

1. Hanoi University of Industry

2. Vinh Long University of Technology Education

3. Nguyen Tat Thanh University

4. University of Transport and Communications

5. Thai Nguyen University of Technology

Abstract

This study presents a prediction study of the surface hardness in surface grinding ASIS 1045 steel. Base on the experimental data on the changes in characteristics of steel in the heat treatment processes, the relationship between the surface hardness and the impacted temperature in surface was found. Besides, the relationship between the cutting temperature and the technology parameters in the grinding was created. The surface hardness was then formulated as a function of the technology parameters in the grinding processes such as the depth of cut, the grinding wheel speed, the workpiece speed, etc. The proposed model was verified by comparing the predicted and measured results of surface hardness. This model can be used to predict the surface hardness when surface grinding.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://www.scientific.net/KEM.853.3.pdf

Reference24 articles.

1. Stephen Malkin, Changsheng Guo: Grinding technology - theory and applications of machining with abrasives – Second editor (Industrial Press, New Yourk 2008).

2. Triratna Shrestha, Sultan F. Alsagabi, Indrajit Charit, Gabriel P. Potirniche and Michael V. Glazoff, in: Effect of Heat Treatment on Microstructure and Hardness of Grade 91 Steel, Metals, Vol. 5, pp.131-149 (2015).

3. [Balwinder Singh and Balwant Singh, in: Effect of Process Parameters on Micro Hardness of Mild Steel Processed by Surface Grinding Process, IOSR Journal of Mechanical and Civil Engineering, Volume 10, Issue 6, pp.61-65 (2014).

4. Liu Judong, Yuan Wei, Huang Songwei and Xu Zhilong, in: Experimental Study on Grinding-hardening of 1060 Steel, Energy Procedia 16, pp.103-108 (2012).

5. Marcelo Oliveira Gomes, Luiz Mauricio Gonçalves Neto, Robson Bruno Dutra Pereira, Carlos Henrique Lauro and Lincoln Cardoso Brandão, in: Influence of cutting parameters on surface hardening of 52100 steel in flat grinding process, The International Journal of Advanced Manufacturing Technology, Vol. 96, p.751–764 (2018).