Affiliation:
1. King Mongkut’s Institute of Technology Ladkrabang
2. Tohoku University
Abstract
This work investigated the influence of oxidation durations on the formation of oxide on the surface of wrought Co-28Cr-6Mo-1Si alloy. The iso-thermal oxidation was individually performed in air at 550°C for 4, 12 and 24 h. For comparison, the surface of the non-oxidized Co-28Cr-6Mo-1Si alloy was concurrently examined. The chemical compositions of the non-oxidized and oxidized alloys were principally analyzed via X-ray photoelectron spectroscopy (XPS). The XPS results revealed that the surface of the non-oxidized alloy enriched in Cr-oxide. After oxidation treatment, the Co-oxide, existing as Co2+ state was observed coexisting with two Cr-oxide states, Cr3+ and Cr4+. The low concentrations of Mo6+ were also observed on the oxidized alloy surface. With the increase in oxidation durations, the Co-oxide was suppressed by Cr-oxide. The XPS depth profile analysis indicated that the thickness of the oxide film increased with increasing the oxidation duration.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献