Affiliation:
1. University of Science and Technology Liaoning
2. Iron & Steel Research Institutes of Ansteel Group Corporation
3. The Cold-Rolling Plant of Ansteel Co Ltd
Abstract
The abrasive particles in the working emulsion were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The wettability and lubricating properties of different emulsion samples were tested by MRS-10E four-ball friction and wear testing machine. The results show that the average particle size of the abrasive particles in the working emulsion is 2.72 μm, the smallest particle size of the abrasive particles is 0.36μm, and the largest size of the abrasive particles is 6.57μm. Furthermore, the abrasive particles can increase the internal friction of emulsions, which leads to the increasing wetting Angle. The abrasive particles cause the lubrication performance of working emulsion to decrease, which eventually leads to larger wear scar diameter and the worse morphology of wear scar on the tested ball.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science