Affiliation:
1. Universitas Sebelas Maret Jl.
2. Sebelas Maret University
Abstract
Magneto-impedance ratio of the multilayer [NiFe/Cu)]N study by the number of multilayer. The both sample films of NiFe and Cu are fabricated by electrodeposition methods on a Cu-patterned substrate. The characteristic of magneto-impedance (MI) is performed at room temperature. Magneto-impedance are modified by varying N times (2, 4, 6 and 8) and the measurements frequency. The result show that the typical symetry of the magneto-impedance curve. Then the magneto-impedance (MI) ratio increases with the increase of frequency and N number layers. The increase of the magnetic permeability should address the increase of the MI ratio. Finally, the highest magneto-impedance ratio of 13.79 is obtained for [NiFe (200)/Cu (25)]8 at frequency 100 kHz.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference17 articles.
1. L.V. Panina, K. Mohri, Magneto-impedance in multilayer films, Sensors and Actuators A: Physical., Vol. 81 (2000) 71-77.
2. G.S. Donald, S. Gerhard, P. Fabrice, J. Brice, K. Tanay, B. Shekhar, Review of On-Chip Inductor Structures with Magnetic Field, IEEE Transactions on Magnetics., Vol. 45 (2009) 4760-4766.
3. K. Mohri, T. Kohsawa, K. Kawashima, H. Yoshida, L. Panina, Magneto-inductive effect (MI effect) in amorphous wires, IEEE Transactions on Magnetics., Vol (28) 3150-3152.
4. Y. Honkura, Development of amorphous wire type MI sensors for automobile use, Journal of Magnetism and Magnetic Materials., Vol 249 (2002) 375-381.
5. J. Llandro, J. J. Palfreyman, A. Lonescu, C. H.W. Barnes, C, Magnetic biosensor technologies for medical applications: a review. Medical and Biological Engineering and Computing, Vol. 48 (2010) 977-998.