Affiliation:
1. Chinese Academy of Sciences
Abstract
A novel 165Kg spot welding robot is introduced, which is independently developed by China. The Newton-Euler approach is used to derive the dynamic equation. Then, entity model of the robot is built up with Solidworks software. The motion of the robot is planned by the position, velocity and acceleration of all the joint. The first three joints, which bear most of the payload and the own weight of the robot, are set with maximum acceleration during the accelerating/ decelerating process. According to the planned trajectory, dynamic simulation is carried out using Solidworks. The driving torques of each joint are obtained. From the dynamic analysis, we find the position yielding the maximum driving torque while the robot is moving with the maximum payload and the maximum speed. The moment of inertia is a predominant influence in the causation of big actuating torque.
Publisher
Trans Tech Publications, Ltd.
Reference10 articles.
1. Jan Swevers, Walter Verdonck, and Joris De Schutter. Dynamic Model Identification for Industrial Robots, IEEE Control Systems Magazine, 27(5), 2007: 58-71.
2. Zhang Xingguo, Xu Haili. Analysis on Struture and Kinematics of FANUC M-6iB Industrial Robot. Journal of Nantong University (Natural Science Edition), 8(1), 2009: 9-12.
3. Rafael M. Inigo, James S. Morton. Simulation of the Dynamics of an Industrial Robot, IEEE TRANSACTIONS on Education, 34(1), 1991: 89-99.
4. Li Qingling, Zhao Yongsheng. Dynamic Analysis and Simulation of 6-DOF Industrial Robot, Journal of Shanghai Dianji University, 11(4), 2008: 275-278.
5. Yanjie Liu, Lining Sun and Zhenwei An. An Approach for Generating High Velocity and High Acceleration Trajectories of Industrial Robots, Proceedings of 2005 IEEE International Conference in Robotics and Automation, Espoo, Finland, June 27-30, 2005, pp.199-204.