Rapid Biomimetic Coating of Biocompatible Calcium Phosphate on Titanium: Influence of Pretreated NaOH Concentration and Cleaning Method

Abstract

In this study, the influence of employing three different sodium hydroxide (NaOH) pretreatment concentration (1, 3 and 5M) and two cleaning methods (Ultrasonic or Rinse) used in rapid biomimetic coating process on phase composition, function groups, thickness, amount and microstructure of the resulted coating was carried out. Regardless of process parameters, x-ray diffraction and Fourier transform infrared spectroscopy revealed that the all coating mainly comprised octacalcium phosphate and hydroxyapatite as main phases while the microstructure similarly consisted of sharp and interconnected plate-like calcium phosphate (CaP) crystals vertically grown on the surface of titanium. However, the change in sodium hydroxide concentration in pretreatment step and cleaning method influenced the weight change after pretreatment, coating continuity and uniformity, but not the weight change after coating. This could be related to amount of the amorphous alkali gel layer formed during pretreatment step which influenced the rate of coating formation in rapid biomimetic coating process.