Affiliation:
1. University of Science and Technology Beijing
2. University of Science and Techonology Beijing
Abstract
A drilling and compression method was designed to produce samples with artifical inner crack. According to the morphology, two types of crack were defined. After heating and holding at different temperatures, the crack healing results were observed under SEM. The starting temperature of crack healing is between 900°C and 950°C. Pseudo-equilibrium phase diagram of 12%Cr was calculated by the Thermo-Calc software to investigate the influence of transformation on the crack healing. It is found that the diffusive transformation has a positive influence on the crack healing behavior. Through experimental results and analysis, we conclude that crack healing is a physical process in association with diffusion, nucleation and grain growth. Any factor which can accelerate diffusion, nucleation and grain growth rate is favorable for the crack healing.
Publisher
Trans Tech Publications, Ltd.
Reference9 articles.
1. Nakamura Y, Mikami M, Wakeshima Y. Influence of heat treatment conditions on microstructures of 12%Cr turbine rotor. Proc of 16th Int Forgemasters Meeting. Cutlers' Hall, Sheffield, UK; October 15-19 (2006).
2. Staubli M, Scarlin B, Mayer KH, Kern TU, Bendick W, Morris P. Materila for advanced steam power plants: the European COST522 action. Proc of the 6th Int Charles Persons Turbine Cof. Dublin, Ireland; September 16-18 (2003).
3. Ha J, Tabuchi M, Hongo H, Yokobori AT, Fuji A. Creep crack growth properties for 12CrWCoB rotor steel using circular notched specimens. Int J Press Vessels Piping (2004); 81: 401-7.
4. Das J, Sivakumar SM. Multiaxial fatigue life prediction of a high temperature steam turbine rotor using a critical plane approach. Eng Fail Anal (2000); 7: 347-58.
5. J. Han. Zhao. Q. Cao, Stury on internal crack recovery of 20MnMo steel [in Chinese], Sci. China (Ser. E ) 27 (1) (1997) 23-27.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献