Ultra Fine-Grained 6wt% Manganese TRIP Steel-Reference-Cited by-同舟云学术

Ultra Fine-Grained 6wt% Manganese TRIP Steel

Published:2010-06 Issue: Volume:654-656 Page:286-289
ISSN:1662-9752
Container-title:Materials Science Forum
language:
Short-container-title:MSF

Author:

Lee Sea Woong¹,Lee Kyoo Young²,De Cooman Bruno C.³

Affiliation:

1. Pohang University of Science

2. POSCO, Sheet Products and Process Research Group

3. Pohang University of Science and Technology

Abstract

Ultra-fine grained TRIP steels (UFG-TRIP) containing 6wt%Mn were produced by intercritical annealing. An ultra-fine grained microstructure with a grain size less than 1μm was obtained. The formation mechanism of the high volume fraction of retained austenite was investigated by dilatometry, XRD and magnetic saturation. The fraction of retained austenite was strongly dependent on the annealing temperature. The tensile properties were also found to be strongly influenced by the annealing temperature with poorer mechanical properties being observed at higher annealing temperatures. It was found that the stabilization of the retained austenite was both a composition and size-effect, made possible by the grain refinement due to the reversely transformed martensite.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.scientific.net/MSF.654-656.286.pdf

Reference5 articles.

1. R.A. Grange, C.R. Hribal, L.F. Porter: Metall Trans A Vol. 8, Nov. 11, p.1543-(1940).

2. M.J. Merwin: MS&T (2007), Sep. 16-20.

3. Jae-Myeong jang, Sung-Joon Kim, Nam Hyun Kang, Kyung-Mox Cho and Dong-Woo Suh: Meter. Mater. Int., Vol. 15, No. 6 (2009), pp.909-916.

4. R.L. Miller: Metall. Trans. (1972), Vol. 3, pp.905-912.

5. Yo Tomota, Akinori Narui and Noriyuki Tsuchida: ISIJ int., Vol. 48 (2008), No. 8, p.11071113.

Cited by 21 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Austenite Nucleation and Growth as a Function of Starting Microstructure for a Fe–0.15C–5.56Mn–1.1Si–1.89Al Medium‐Mn Steel;steel research international;2023-04-27

2. Austenite transformation and deformation behavior of a cold-rolled medium-Mn steel under different annealing temperatures;Materials Science and Engineering: A;2022-01

3. Extraordinary warm ductility of a Mn-rich high-strength steel achieved at temperature below 0.5 Tm;Materials Science and Engineering: A;2021-01

4. The Novel Combination of Strength and Ductility in 0.4C‐7Mn‐3.2Al Medium Manganese Steel by Intercritical Annealing;steel research international;2019-09-05

5. Influence of retained austenite and Cu precipitates on the mechanical properties of a cold-rolled and intercritically annealed medium Mn steel;Materials Science and Engineering: A;2019-02