Influence of Electrolyte-Plasma Hardening Technological Parameters on the Structure and Properties of Banding Steel 2-Reference-Cited by-同舟云学术

Influence of Electrolyte-Plasma Hardening Technological Parameters on the Structure and Properties of Banding Steel 2

Published:2020-05-04 Issue: Volume:989 Page:787-792
ISSN:1662-9752
Container-title:Materials Science Forum
language:
Short-container-title:MSF

Author:

Tabieva Erkezhan Erkinbekkyzy¹,Zhurerova Laila Gylymmeddenovna¹^ORCID,Baizhan Daryn²

Affiliation:

1. D. Serikbayev East-Kazakhstan State Technical University

2. S. Amanzholov East-Kazakhstan State University

Abstract

This work is devoted to the study of the influence of technological parameters of electrolytic-plasma surface quenching (EPQ) on the structure and surface properties of samples of bandage steel 2. In the electrolytic-plasma treatment, we performed the cathode mode in an electrolyte containing an aqueous solution of 20% carbamide (NH2)2CO and 20% sodium carbonate Na2CO3, on the installation of EPO with appropriate technological processing conditions. According to the electron-optical, X-ray phase studies, the phase composition of the steel after the EPQ was determined. This differs from the initial one by the formation of cementite and iron oxides on the surface of the samples. It is established that the microhardness of the bandage steel 2 after the EPQ during heating for 4 seconds increases 2.4 times, in comparison with the initial state.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.scientific.net/MSF.989.787.pdf

Reference19 articles.

1. A.S. Razumov, I.L. Pasholok, V.N. Zyurenko, Wheels of increased operational durability for freight cars of a new generation, Sat. scientific Tr.: The development of railway transport in the context of reform. Moscow: Intext, 2003. pp.199-206.

2. E.S. Yagodinsky, The nature of damage to parts of the coupler and methods for their restoration, Collection of scientific works UkrDAZT, 145 (2014) 171-174.

3. G.I. Brunchukov, Methods to improve the operational durability of locomotive tires, Sb. scientific Tr.: The development of railway transport in the conditions of reform. Moscow, Intext, (2006) 214-220.

4. M.F. Verigo, The reasons for the increase in the intensity of lateral wear of rails and wheel flanges. Moscow, Transport, (1992).

5. P. Clayton, K.J. Sawley, P.J. Bolton, G.M. Pell, Wear of bainitic steels, Wear, 120 (1987) 199-220.