Evaluation of Fatigue Strength of Butt Joint by Intensity of Singular Stress Field-Reference-Cited by-同舟云学术

Evaluation of Fatigue Strength of Butt Joint by Intensity of Singular Stress Field

Published:2018-12 Issue: Volume:940 Page:94-98
ISSN:1662-9752
Container-title:Materials Science Forum
language:
Short-container-title:MSF

Author:

Miyazaki Tatsujiro¹,Matsuda Takeru²,Naka Kaito¹

Affiliation:

1. University of Ryukyus

2. University of the Ryukyus

Abstract

In this study, the fatigue fracture criterion of the adhesively bonded joint is discussed. The singular stress field is formed at the interface end in the butt joint and causes the debonding fracture. The singular stress field is represented with the intensity of singular stress field (ISSF). The static debonding strength of the adhesively bonded joints is expressed with a constant value of critical ISSF. The rotating-bending fatigue tests are carried out on the butt joints of 15mm in diameter with four different adhesive thicknesses of 109 - 159μm, 209 - 265μm, 393 - 432μm and 754 - 841μm. The evaluation method by the ISSF is applied to the experimental results. It is found that the fatigue strength of the butt joint can be expressed with the constant value of critical ISSF.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.scientific.net/MSF.940.94.pdf

Reference13 articles.

1. Barnes, T. A., Pashby, I. R., Joining techniques for aluminium spaceframes used in automobiles: Part II - adhesive bonding and mechanical fasteners, Journal of Materials Processing Technology, Vol. 99 (2000), pp.72-79.

2. Higgins, A., Adhesive bonding of aircraft structures, International Journal of Adhesion and Adhesives, Vol. 20, No. 5 (2000), pp.367-376.

3. Petrie, E. M., Adhesives for the assembly of aircraft structures and components: Decades of performance improvement, with the new applications of the horizon, Metal Finishing, Vol. 106, No. 2 (2008), pp.26-31.

4. Akisanya, A. R., Meng, C. S., Initiation of fracture at the interface corner of bi-material joints, Journal of the Mechanics and Physics of Solids, Vol. 51 (2003), pp.27-46.

5. Hattori, T., A stress-singularity-parameter approach for evaluating adhesive strength of single lap joints, Transactions of the Japan Society of Mechanical Engineers, Series A, Vol. 56，No. 523 (1990), pp.618-623 (in Japanese).