Affiliation:
1. Ural Federal University
2. Vyatka State University
Abstract
A theoretical investigation of the influence of the profile radius of the deforming roller on the limiting degrees of deformation in the process of flow forming is performed. Analytical and graphical dependencies allowing to determine the limiting degrees of deformation are obtained depending on the ratio of the profile radius of the roller to the initial thickness of the workpiece wall. The main practical ways of using the obtained dependences are considered. The results of the theoretical study are in good agreement with the known experimental data. The developed engineering technique can be used in designing the process of flow forming of cylindrical blanks by a torus roller.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference21 articles.
1. M. Sivanandini, S.S. Dhami, B.S. Pabla, Flow Forming Of Tubes-A Review, International Journal of Scientific & Engineering Research, 1 (2012) 1-11.
2. C.C. Wong, T.A. Dean, J. Lin, A review of spinning, shear forming and flow forming processes, International Journal of Machine Tools & Manufacture, 43 (2003) 1419-1435.
3. Kalpakjian, S., Rajagopal, S., Spinning of tubes: a review, J. Appl. Metalwork, 2 (1982) 211-223.
4. Plewinski, A., Denger, T., Spinning and flow forming hard-to-deform metal alloys, Arch. Civ. Mech. Eng., 9 (2009) 101-109.
5. S. Ekinovica, H. Dukicb, I. Plancica, E. Begovica, Assessment of the surface topography of Al 99.5% tubular products formed by cold flow forming technology, Procedia Engineering, 132 (2015) 389-396.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献