Affiliation:
1. National Research Tomsk Polytechnic University
Abstract
The paper assesses the possibility of using the reverberation phenomenon to control the imperfections and the stress-strain state of solid dielectric materials by the method of mechanoelectrical transformations. The main advantage of reverberation is the repeated intersections of the excitation zones of inhomogeneities by acoustic waves, that is displayed in response parameters. The reverberation makes it possible to accumulate distortions of wave fronts. A comparative analysis of the responses from the sample under condition of uniaxial compression under different loads was performed. Differential analysis for the deterministic time component of the response in the interval (0–0.3) ms, and a statistical analysis of the differences for the pseudo-random component in the interval (0.8–1.8) ms were performed. For the statistical analysis, the distribution of the pulse flow is selected. The response was calculated according to the mathematical model under the conditions of a change in the speed of sound, which simulates a change in the sample inhomogeneity under load. The calculation showed a qualitative similarity with changes in responses in a real experiment. According to the obtained results, it was concluded that it is possible to use the deterministic and pseudo-random components of the responses in the reverberation condition to control the change in defectiveness and the degree of heterogeneity under the action of the mechanical load on the sample.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献