Affiliation:
1. Zhejiang University
2. State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University
Abstract
An error mapping modeling and identification technology for the circular path test of NC machine tools is proposed. First, geometric error modeling of the NC machine tool was established and the theory of the laser measurement method was introduced. Then through further analyzing the influence of the geometric errors to circular path deviations, the error items were identified, such as the displacement errors, backlashes and squareness errors. Finally measurement and compensation experiment of circular path was conducted. The experimental results show that the geometric error modeling is feasible, and the measurement method can be set up easily and rapidly, even can be used to measure smaller radius circular path under a high feed rate condition. After compensation, the accuracy of the circular path of the machine tool is improved by 50.88%.
Publisher
Trans Tech Publications, Ltd.
Reference11 articles.
1. X.C. Xi, A.N. Poo and G.S. Hong: International Journal of Machine Tools & Manufacture, Vol. 49 (2009) pp.395-406.
2. ISO 230-4: 1996, an International Standard, by International Standards Organization (1996).
3. R. Schultschik: Annals of the CIRP, Vol. 25 (1977) No. 1, pp.223-227.
4. G. Zhanga, R. Ouyanga, B. Lua, R. Hockenb, R. Vealeb and A. Donmezb: CIRP Annals, Vol. 37, (1988) No. 1, pp.515-518.
5. W.Y. Jywe and C.H. Liu: International Journal of Advance Manufacturing and Technology, Vol. 17 (2001) pp.189-195.