Effects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel Powder-Reference-Cited by-同舟云学术

Effects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel Powder

Published:2012-11 Issue: Volume:217-219 Page:483-486
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Ke Mei Yuan¹

Affiliation:

1. Shunde Polytechnic

Abstract

Effects of Sintering atmosphere and temperature on properties of warm compacted 410L stainless steel powder were studied. Sintered density, hardness, tensile strength and elongation were measured. Results showed that in order to achieve high comprehensive properties, the optimal sintering temperature was 1230°C for 410L stainless steel powder. At the same sintering temperature, density and hardness sintered in vacuum were much higher than that sintered in cracked ammonia while tensile strength sintered in cracked ammonia were much higher than that in vacuum. When sintered in vacuum at 1230°C, sintered density was 7.45 g•cm-3, hardness was 65 HRB, tensile strength was 410 MPa and elongation was 29.5%. When sintered in cracked ammonia atmosphere at 1230°C, sintered density was 7.26 g•cm-3, hardness was 97 HRB, tensile strength was 515 MPa and elongation was 3.8%.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.217-219.483.pdf

Reference9 articles.

1. H. Rutz, F. Hanejko and S. Luk: J. Powder Report, 1994, 49(9), p.40.

2. U. Engstroem, B. Johansson, H. Rutz, F. Hanejko, S. Luk. High density PM materials for future applications U. PA 94, Vol. 1 [C]. European Powder Metallurgy Association, (1994).

3. G. F. Bocchini: J. Powder Metallurgy. 1999, 42(2), p.171.

4. M. N. Shah, J. A. Isaacs. P/M processing of gear components: case studies of economic competitiveness. Advances in Powder Metallurgy and Particulate Materials-2000, Part 10 [C], Princeton, NJ: MPIF, (2000).

5. M. LI, S. GUO, T. LIN. Powder Metall Industry, 2001, 11(3), p.29.