Research on the Key Technology of Automatic Programming System for Line-Contact Processing-Reference-Cited by-同舟云学术

Research on the Key Technology of Automatic Programming System for Line-Contact Processing

Published:2013-09 Issue: Volume:423-426 Page:2873-2876
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Wang Kun Qi¹,Yang Bao Chen¹,Xiong Lei¹,Liu Le¹

Affiliation:

1. Xi’an Technological University

Abstract

In view of the current situation of line contact efficiency of NC machining without automatic programing system, the automatic programming system for NC machining based on line contact processing is developed. According to the characteristics of line contact processing, the key technologies in the automatic programming system of this paper is studied. After surface modeling, the data of DXF files generated by CAD systems can be read. And the surface processing information is obtained by these data sorted. Through the design of machining process and the sorting of tool path, the tool path of line contact processing is got. Then the research of soft cut of ruled surface is completed, and the graphical automatic programming is realized.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.423-426.2873.pdf

Reference6 articles.

1. Kunqi Wang, Runxiao Wang, Binggao Yu and Changfu Zhang, International Technology and Innovation Conference. No. 11(2006), p.1494.

2. Lixin Cao, Hongji Wu and Jian Liu, Journal of Mechanical Engineering, Vol. 39(2003), No. 7, p.134.

3. Dexing Zheng, Kunqi Wang. Mechanical design and manufacturing, Vol. 6, No. 6(2009), p.184.

4. Liqun Lei, Kunqi Wang and Lirong Chen. Machinery Design & Manufacture. No. 10(2007), pp.1083-1084.

5. Zhixin Jia, Zhiyong Wang and Mingji Huang. Computer Engineering, Vol. 34 No. 6(2008), p.249.