Abstract
The laser welding is usable method for joining thin plates with low energy input and precise penetration control. When joining of very thin sheets such as 0.5 mm the shape of the weld must be complete in order to achieve a good strength of the joint. The part of the test welds were welded without shielding gas and other part of the test welds by using 65 mm shielding gas nozzle behind the key hole. The strength of the laser weld of 0.5 mm Austenitic stainless steel (ASS) plate was measured in welds without shielding gas and Ar shielded weld. The strength of the shielded weld joints was significantly better than the joint weld without shielding gas due to convex shielded welds. In addition the shielded welds were bright which improves the corrosion properties of the joint.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference8 articles.
1. Introduktion till lasersvetsning, PROLAS projektet nr 304-58-11, Luleå tekniska universitet, University of Oulu Reference to a book.
2. Duley W.W., Laser Welding, University of Waterloo Reference to a chapter in an edited book.
3. Keskitalo M.,Hietala M., Mäntyjärvi K., The Influence of Shielding Gas Configurations on Formability of the Ferritic Stainless Steel Laser Weld, Physics Procedia Volume 89, 2017, Pages 80-88.
4. Keskitalo M., Sundqvist J., Mäntyjärvi K., Powell J., Kaplan A. F. H. 2015. The influence of shielding gas and heat input on the mechanical properties of laser welds in ferritic stainless steel. Physics procedia 78:222-229. December (2015).
5. Keskitalo M., Mäntyjärvi K., The influence of the shielding gas to the static and dynamic strength properties of laser welded work-hardened nitrogen alloyed austenitic stainless steel. Key Engineering Materials Vol. 549 2013 pp.471-476.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献