Effect of Pilot Injection on Mixture Formation, Ignition Process and Flame Development in Diesel Combustion
-
Published:2013-08
Issue:
Volume:390
Page:327-332
-
ISSN:1662-7482
-
Container-title:Applied Mechanics and Materials
-
language:
-
Short-container-title:AMM
Author:
Khalid Amir1, Jaat M.1, Zaman Izzuddin1, Manshoor B.1, Fawzi Mas1
Affiliation:
1. Universiti Tun Hussein Onn Malaysia
Abstract
The alternative combustion strategies with systematic control of mixture formation have provided new opportunities and considerable improvement in the combustion process and response to meet the stringent emissions standards. Purpose of this research is to investigate the influences of pilot injection on the fuel-air premixing especially during ignition delay period. During this period, the interaction between fuel spray and surrounding gas prior to ignition which linked to the improvement of mixture formation, ignition process and initial heat recovery thus predominantly influences the combustion process and exhaust emissions. This study investigates the effects of pilot injection using a rapid compression machine together with the schlieren photography and direct photography methods. The detail behavior of mixture formation during ignition delay period was investigated using the schlieren photography system with a high speed digital video camera. This method can capture spray evaporation, spray interference and mixture formation clearly with real images. Ignition process and flame development were investigated by direct photography method using a light sensitive high-speed color digital video camera. Pilot injection promotes mixture formation during ignition delay period and slower oxidation reaction and thus leads to earlier rise and lower peak heat release rate.
Publisher
Trans Tech Publications, Ltd.
Reference11 articles.
1. Horibe, N., Annen, T., Miyazaki, Y. and Ishiyama, T., Heat Release Rate and NOx Formation Process in Two-Stage Injection Diesel PCCI Combustion in a Constant-Volume Vessel, SAE paper 2010-01-0608, (2010). 2. Bruneaux, G., Verhoeven, D. and Baritaud, T., High Pressure Diesel Spray and Combustion Visualization in a Transparent Model Diesel Engine, SAE Paper 1999-01-3468, (2009). 3. Khalid, A., and Manshoor, B., Effect of High Swirl Velocity on Mixture Formation and Combustion Process of Diesel Spray, Applied Mechanics and Materials Vols. 229-231 (2012), Trans tech Publications, Switzerland, pp.695-699. 4. Khalid, A., Effect of Ambient Temperature and Oxygen Concentration on Ignition and Combustion Process of Diesel Spray,. Asian Journal of Scientific Research, 2013. pp.1-11. 5. Okamoto, S., Shibamoto, R., Kidoguchi, Y. and Miwa, K., Effect of High Turbulence Mixing on Reduction of Exhaust Emissions from a DI Diesel Engine Employing EGR and Pilot Injection, Trans. of JSAE, Vol. 38, No. 2, pp.93-99, (2007).
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|